Contact Moore Garage Door Pros
Serving Moore, OK and the surrounding area.
- 2900 S Telephone Rd, Moore, OK 73160
- (405) 337-9841
Ready to get started? Request a quote and tell us what your door’s doing - the more detail, the faster we can help.
How to reach us
Tell us what the door is doing and roughly where you are - that is enough to know whether it is a same-visit fix or something that needs a part ordered first.
Call and tell us what it’s doing
(405) 337-9841 - describe the symptom and roughly where you are.
Or send it in writing
Use the request form if it’s easier than talking.
We diagnose on site
A technician tests the door under power and by hand before anything is quoted or replaced.
You approve the plan
You hear what failed and what it takes to fix it - the work starts only after that.
What We Will Not Do
We don't quote a job over the phone without asking what's actually wrong first, because a stuck door can mean a broken spring, a bent track, or a dead opener board, and those are three different bills. We don't carry every opener brand's circuit boards on the truck, so if yours is an odd or discontinued model, parts can take a few extra days - we'll tell you that up front instead of promising same-day when it isn't true.
We don't replace a whole door when a spring or a cable will do the job, and we don't replace a spring when the real problem is a bent track pulling the door off alignment. If a repair would cost most of what a new door costs, we'll say so and let you decide, rather than running up a bill on a door that's past the point of patching.
We don't do security gates, fence gates, or commercial roll-up doors at the moment - if that's what you're calling about, we'll tell you plainly instead of taking the job and figuring it out as we go. And we don't show up unannounced; if we're running behind on a call ahead of yours, you'll hear about it before your window starts.
What Comes Next
Call 405-337-9841 and tell us what the door is doing
Won't open, opens partway and reverses, makes a bang and stops, opener runs but the door doesn't move. That detail decides which parts come on the truck, so the more specific you can be, the less time the diagnosis takes once we're at your house. We're based at 2900 S Telephone Rd, Moore, OK 73160. If you're closer to Del City, Newcastle, or Mustang than you are to our shop, mention that when you call so we can plan the drive and give you a realistic window instead of a guess.
Once we're on site, we look at the door before we quote anything
Springs, cables, rollers, track alignment, and the opener's travel settings if it has one. You get a number before any work starts, not after. If the fix is small, we usually finish it the same visit. If a part has to be ordered, we'll tell you what and roughly how long, rather than leaving you checking your phone.
The Work We Take On
Most of the houses we work on across the Moore area went up between 1959 and 2004, with the bulk of that stock dating to around 1980, and across the roughly 18 named subdivisions in the area the doors and openers we see most are the ones that era actually shipped with - single-piece and sectional doors on side-mounted torsion springs, plus the retrofit openers homeowners added later. That mix is most of our day: broken torsion springs, worn rollers, snapped cables, bent track, and opener logic boards that finally gave out.
We also handle insulated panel upgrades, which matter here - this area sits in a moderate-cold climate band, so a door that seals poorly at the bottom costs you real heat in winter, not just a drafty garage. Across the roughly 61,473 households and 39,476 owner-occupied houses in the service area, garage doors take a steady beating from temperature swings season to season, and that shows up as cracked panels and stiff hardware more than anything dramatic.
We work on residential doors - wood, steel, and insulated steel sectional doors, torsion and extension spring systems, and most major opener brands. We do not currently take on new construction installs at scale; if that's your project, say so when you call and we'll tell you honestly whether it's a fit.
Door stuck open or won’t close?
A garage door that won’t close leaves your home open. Tell us what’s happening and we’ll help you figure out the fastest way to get it secured.
Frequently asked
Straight answers about garage door repair in Moore. Still unsure? Ask us directly.
My garage door opener remote stopped working but the wall button still opens the door. What's wrong?
That's almost always the remote's battery, the remote's pairing to the logic board, or a failing antenna wire on the opener unit itself, not the motor. Given how much of the opener stock here dates to the 80s and 90s, it's common for the board to lose its memory after a power surge. We can test it on the spot.
Why did my door suddenly get hard to lift by hand after it got cold?
In our climate, cold temperatures stiffen the grease in the tracks and can tighten an already-worn torsion spring's tension slightly. If the door was already a little out of balance, winter cold is often what pushes it from 'manageable' to 'won't budge.' We check balance and track lubrication together on winter calls.
Is it worth replacing an old door instead of fixing the spring?
If the panels are solid and it's just a spring or cable, repair is almost always the better move, especially on doors from the 80s and 90s builder stock that are otherwise sound. We only recommend replacement when the panels are bent, rusted through, or the door is far enough out of square that hardware won't hold alignment.
Do you carry parts for older opener brands on the truck?
We carry the common springs, cables, and rollers that fit most doors from this area's housing stock. Opener logic boards for discontinued models are sometimes a special order, and we'll tell you that honestly on the call instead of promising a same-day fix we can't deliver.